AMPSEAL / AMPSEAL 16
Compact power connectors for high-density applications. 3.0 mm pitch with up to 5A per contact capacity.
- IP67 sealed
- Harsh environments
- Power + signal
Cable Assembly
TE Connectivity Connector Certified Assemblies
Custom cable assemblies with genuine TE Connectivity connectors. Wide catalog of series for industrial, automotive, and consumer applications with certified crimping.
TE Connectivity Series50+
QualityHigh
Samples5–7 Days
CertifiedISO 9001
Application Context
What a TE Connectivity cable assembly requires
A TE Connectivity cable assembly is only as good as the parts and the crimp behind it. We build exclusively with genuine TE Connectivity connectors sourced through authorized distribution channels, so the housings, terminals, seals, and backshells on the finished assembly match the references on your drawing. Crimping is validated to TE Connectivity specifications with pull-force and cross-section quality control on every terminal family, because a connector that meets its rating on paper still fails in the field if the crimp is wrong.
The right series depends on the job. AMPSEAL and AMPSEAL 16 give IP67-sealed power and signal for harsh environments; Superseal 1.5 adds a waterproof system for sensor circuits; the Dynamic series covers industry-standard board- and wire-to-wire signal connections; and MATE-N-LOK / MicroTimer handle miniature, high-density layouts. Where the application needs full environmental protection we build waterproof cable assemblies, and for rugged sealed interfaces we also terminate Deutsch connector assemblies. If a specified TE part carries a long lead time or high MOQ, we flag it at RFQ review and — where the form, fit, and mating interface allow — propose a buyer-approved alternate, with the same review available for Molex and Amphenol connector programs.
Applications
Available TE Connectivity connector series
Wide catalog of connectors for all applications.
Superseal 1.5
Power connector system for high-current applications. 4.2 mm pitch with excellent electrical performance.
- 1.5 mm system
- Sensor circuits
- Waterproof design
Dynamic Series
Industry-standard signal connectors for electronic applications. Compatible with PCB and wire-to-wire connections.
- Power + signal
- Board / wire options
- Wide current range
MATE-N-LOK / MicroTimer
Miniature high-density connectors for space-constrained applications. 2.5 mm pitch with excellent reliability.
- Industrial proven
- Cable assemblies
- Production support
Engineering Challenges
Review risk before production
Genuine Sourcing
Connectors sourced only through authorized TE Connectivity distribution channels so housings, terminals, and seals are authentic — not gray-market look-alikes.
Connector Selection
Series, pitch, current rating, and sealing class matched to the application; gaps in a drawing that names a family but not a full BOM are closed before quotation.
Crimp Validation
Crimp tooling reviewed upfront and validated to TE specifications with pull-force and cross-section quality control on each terminal family.
Availability & Lead Time
Constrained parts flagged at RFQ review, with buyer-approved alternates proposed where form, fit, and mating interface allow — transparent cost and MOQ notes, buyer keeps the decision.
Technical Capabilities
Technical specifications
Genuine TE Connectivity connectors, certified crimping, and defined sample lead times across the available series.
ConnectorsGenuine TE Connectivity
Available SeriesAMPSEAL, Superseal, Dynamic, MATE-N-LOK, MicroTimer
CrimpingCertified
Max VoltagePer series
Max CurrentUp to 9A
Lead Time5–7 days samples
Manufacturing Process
A controlled build, drawing to shipment
01Drawing / BOM Review
02Connector Sourcing
03Cutting & Stripping
04Crimping / Assembly
05In-process Inspection
06Electrical Test
07Final Inspection
08Packaging & Export
Quality & Testing
Documentation for buyer review
Every TE Connectivity assembly is built under our ISO 9001 quality system, with certified crimping checked by pull-force and cross-section analysis and verified electrically before it ships — all documented for lot-level traceability.
Incoming Connector CheckCrimp Pull-ForceCross-Section AnalysisContinuity TestIn-process InspectionFinal InspectionLot TraceabilityDocumentationCorrective Action
Why WHP
Why choose our TE Connectivity assemblies
Certified quality and proven experience.
Genuine Connectors
We exclusively use genuine TE Connectivity connectors from authorized distribution channels, guaranteeing authenticity and performance.
Certified Crimping
Crimping processes validated to TE Connectivity specifications with pull-force and cross-section quality control.
Wide Inventory
Stock of the most popular series to reduce lead times. Access to the complete TE Connectivity catalog for special orders.
Technical Support
Our engineers can advise you on selecting the optimal connector for your specific application.
Quality & reference standards
We build under an ISO 9001 quality system with certified crimping, and align programs with the workmanship and quality references buyers use during supplier review.
ISO 9001Quality System
Certified CrimpingTE Specification
highQuality Rate
FAQ
Buyer questions before RFQ
Can you quote from TE part numbers only?
Yes. If you already know the TE Connectivity housing, terminal, seal, or backshell references, we can review the mating parts, wire range, tooling, and sourcing risk directly from that list.
What if our drawing names a TE family but not a full BOM?
We can help close the gaps before quotation. Send the drawing, application, current load, sealing target, and panel or harness constraints, and we will identify the missing connector details that affect cost and lead time.
Do you support prototype samples and scheduled production releases?
Yes. The same workflow can support first samples, pilot builds, and recurring production once the connector family, crimp tooling, test method, and labeling rules are locked.
OEM Program Entry
Need Cable Assemblies with TE Connectivity Connectors?
Request a quote for your TE Connectivity connector project. Samples available in 5–7 business days. Our engineering team reviews connector family, crimp tooling, sourcing risk, and test scope before manufacturing starts.
We will review
- 01Design Feasibility
- 02Component Availability
- 03Cost Drivers
- 04Validation Requirements
Related Capabilities
Related connector cable assemblies
Custom cable assembly services for other connector brands and sealed interfaces.
Industries
TE Connectivity connector applications
Solutions for multiple industries and applications.
Consumer Electronics
Home appliances, audio/video equipment, entertainment devices, and computer peripherals.
Automotive
Lighting systems, infotainment, sensors, and vehicle control modules.
Industrial
Automation equipment, control panels, industrial machinery, and power systems.
Telecommunications
Network equipment, servers, data center infrastructure, and communication systems.
Medical
Diagnostic equipment, monitoring devices, and laboratory instruments.
Solar Energy
Solar inverters, energy storage systems, and charge controllers.
Representative Project
Representative project type (illustrative)
Representative project type we handle, shown for illustration. Not a specific named customer.
Scenario — An industrial buyer brings a TE Connectivity connector program where a connector or component on the original bill of materials carries a long lead time or limited availability.
Challenge — A specified part can dominate the schedule when its lead time or minimum order quantity does not match the program timeline, putting the whole release at risk.
Solution — We flag the constrained part during RFQ review and, where the form, fit, and mating interface allow it, propose a buyer-approved alternate with transparent cost and MOQ notes — the buyer keeps the final decision.
Result — With the sourcing risk surfaced early and an approved alternate path available, the program stays on its intended schedule instead of stalling on a single part.
- Connector sourcing reviewed at RFQ stage
- Buyer-approved alternates proposed where form/fit/interface allow
- Transparent cost and MOQ notes
Before You Send Your RFQ
What to send, and what you get back
Send this with your RFQ
- TE part numbers, approved alternates, or mating connector details
- Drawing, BOM, wire list, and target annual or monthly volume
- Sample quantity, test plan, labeling, and packaging requirements
What you get back
- Connector family review and sourcing-risk feedback
- Quoted sample lead time, production lead time, and MOQ
- Recommended test scope, documents, and quality checkpoints
Reference Standards
Relevant standards & reference bodies
Common quality and workmanship references used during buyer review and supplier qualification.