在電子採購中，PCB這個詞經常被用得太籠統。很多團隊口頭上說要PCB報價，實際上需要的是組裝板、燒錄、線纜組件與功能測試。
PCB指printed circuit board，也就是裸板。只有基材、銅箔、阻焊、字元、過孔與表面處理，沒有元件。元件貼裝焊接完成後才叫PCBA。SMT是裝配製程，不是產品名稱。
If your product includes both boards and cable assemblies, define the interconnect scope early. That means connector series, mating orientation, current load, wire gauge, strain relief, environmental exposure, and test coverage. Clear scope at RFQ stage prevents re-quotes, NPI delays, and first-article failures caused by mismatched board-to-wire interfaces.
1. PCB到底是什麼意思
PCB stands for printed circuit board. In B2B manufacturing language, that means the fabricated board before component loading: substrate, copper pattern, drilled holes, plated vias, solder mask, silkscreen legend, and surface finish. It does not automatically include components, soldering, firmware flashing, conformal coating, depaneling, box build, or cable integration.
This distinction matters because bare-board suppliers, PCB assembly suppliers, and full system integrators quote different scopes, tooling assumptions, minimum order quantities, and quality records. If the RFQ says "PCB" but the attached files imply a full assembled module, the first quote is often wrong before engineering review even starts.
PCB
Bare fabricated board only: laminate, copper, holes, mask, legend, finish.
PCBA
Assembled board: PCB plus components, soldering, inspection, and often test.
SMT
Surface mount technology: one process used during assembly, not the product itself.
2. PCB、PCBA與SMT的差異
Buyers should use PCB when requesting fabrication only, PCBA when requesting components and assembly, and SMT when discussing the placement process, line capability, package compatibility, or stencil-and-reflow controls. Mixing the terms creates avoidable confusion around whether pricing includes procurement, AOI, X-ray, ICT, FCT, programming, or burn-in.
A quick rule works well in sourcing meetings: if the board can leave the factory with no components mounted, it is a PCB; if it leaves with components soldered, it is PCBA; if you are talking about chip placement, paste printing, reflow profile, tombstoning, or 0201/BGA capability, you are talking about SMT.
| Term | What It Means | Usually Included | Common RFQ Files |
|---|---|---|---|
| PCB | Bare fabricated board | Material, copper, drill, finish, electrical test | Gerber/ODB++, drill, stackup, fab notes |
| PCBA | Assembled circuit board | PCB + components + assembly + inspection/test | Gerber/ODB++, BOM, XY, assembly drawing, test notes |
| SMT | Surface mount assembly process | Stencil, placement, reflow, AOI, process control | Package data, panel info, DFM notes, process limits |
3. 電路板由哪些部分組成
Most commercial boards start with FR-4 epoxy-glass laminate, then add copper foil, drilled and plated vias, solder mask, silkscreen, and a final finish such as ENIG or HASL. Higher-performance programs may move to polyimide for flex, aluminum-core for thermal management, or low-loss RF materials such as Rogers for controlled high-frequency performance.
When buyers ask what a circuit board is made of, the practical answer is not just “fiberglass and copper.” The real specification includes dielectric system, Tg value, copper weight, layer count, impedance targets, via structure, finish type, thickness tolerance, UL flame rating, and any compliance requirement such as RoHS, REACH, or IPC class level.
| Board Element | Why It Matters to Buyers |
|---|---|
| Base material | Cost, thermal behavior, flex performance, signal integrity |
| Copper weight | Current carrying capacity, trace width, heat rise |
| Layer count | Routing density, EMI control, stackup complexity, cost |
| Surface finish | Shelf life, solderability, fine-pitch performance, cost |
| Via structure | Density, reliability, HDI capability, lead time |
| Testing and class | Yield expectations, documentation, acceptance criteria |
4. RFQ時採購應提供哪些資料
For bare PCB pricing, send Gerber or ODB++ data, drill data, stackup, finished thickness, copper weight, finish, solder-mask color, panel preference, quantity, and compliance targets. For PCBA, add a clean BOM, pick-and-place data, assembly drawing, approved substitutions policy, programming needs, and inspection or functional-test requirements.
If the product also includes wire harnesses or cable assemblies, send the connector part numbers, mating orientation, harness drawing, wire list, current and voltage, environment, bend constraints, labeling, and end-of-line test plan. Buyers who submit board files without the interconnect package usually trigger re-quotation after DFM review because the board-to-wire scope was incomplete.
Minimum RFQ Package
Gerber or ODB++ files and drill data
BOM, approved AVL/alternates, and assembly drawing if PCBA is required
Quantity by build stage: prototype, EVT/DVT/PVT, and production
Environment, compliance target, and test/documentation requirements
Connector and harness drawings for any board-to-wire integration
5. 什麼因素影響成本、交期與測試
Board cost moves fastest when layer count increases, impedance control is added, via structures become more complex, copper gets heavier, or the finish shifts from a low-cost option to ENIG, hard gold, or specialized RF material. Lead time stretches further when buyers combine hard-to-source ICs, tight mechanical tolerances, custom test fixtures, firmware loading, conformal coating, or full box-build integration.
Testing scope must match product risk. A simple bare PCB may only need electrical test, while an assembled control module may need AOI, X-ray for BGA or QFN, ICT or flying probe, functional test, programming verification, and cable continuity checks. The more clearly buyers define risk, reliability target, and field environment, the easier it is for suppliers to quote the right process without padding price or schedule.
| Driver | Impact on Price | Impact on Lead Time |
|---|---|---|
| Higher layer count or HDI | Higher fabrication and yield risk | Longer engineering and fabrication cycle |
| Special material or finish | Material premium | Longer procurement window |
| PCBA with constrained components | BOM volatility and buying risk | Longer sourcing cycle |
| Functional test + cable integration | Fixture and labor cost | Longer NPI and validation phase |
For mixed board-and-harness projects, ask suppliers to confirm ownership of each deliverable: bare PCB, component procurement, PCBA, firmware loading, cable assembly, box build, and final test. Ambiguity at this step is a common cause of cost creep.
6. 常見問題
PCB是否表示板子已經裝好元件？
不是。PCB通常只表示裸板。只有元件完成安裝與焊接後，正確名稱才是PCBA。
SMT和PCBA是一樣的嗎？
不是。SMT是裝配時使用的一種製程，而PCBA是最終完成裝配的成品板。
如果產品同時包含PCB與線束，RFQ應該提供什麼？
請提供板廠資料、BOM、裝配圖、連接器料號、線束圖、各階段數量、使用環境、目標交期與合規目標。